Page 1 of 1
newlisp_8000rc1_win-tk.exe CRC 'BE754051'
Posted: Sun Mar 28, 2004 4:29 pm
by gerhard zintl
Hallo Lutz,
I downloaded the new Version 8.0rc1 and installed it on my Windows XP Pro system without any problem.
The documentation is correctly displayed after adapting the config-file.
But trying to run a most simple Lisp statement (+ 1 2 3) results in an error.
The log-file is as follows:
error writing "sock164": connection reset by peer
error writing "sock164": connection reset by peer
while executing
"puts $nlio $lastCommand"
(procedure "ProcessConsoleInput" line 28)
invoked from within
"ProcessConsoleInput"
(command bound to event)
Do you have any hint what went wrong?
Kind regards
Gerhard Zintl
Posted: Sun Mar 28, 2004 4:53 pm
by Lutz
Bring up the taskmanager and make sure that neither newlisp.exe nor newlisp-tk.exe is running. Than try to start newlisp-tk again.
If you installed as default c:\newlisp then no changes for displaying the documentaion should be necessary. Only if you changed the directory to a different place (which you can) you need to make changes for the path of the help files.
You may also have an old bad configured newlisp-tk.config. Delete it and generate a new one by doing a 'Options/Save settings'
Lutz
newlisp_8000rc1_win-tk.exe CRC 'BE754051'
Posted: Sun Mar 28, 2004 5:14 pm
by gerhard zintl
Hallo Lutz,
I did as you proposed. New config-file created. TaskMgr showed just newlisp-tk.exe after running it. Same error message after entering '2'in newlisp-tk.
error writing "sock164": connection reset by peer
error writing "sock164": connection reset by peer
while executing
"puts $nlio $lastCommand"
(procedure "ProcessConsoleInput" line 28)
invoked from within
"ProcessConsoleInput"
(command bound to event)
V7.5.14 runs without any problem.
Posted: Sun Mar 28, 2004 5:46 pm
by HPW
Hello Lutz,
I also have the problems with 8.0 RC1 with newLISP-tk.
The DLL works normal.
Posted: Sun Mar 28, 2004 7:33 pm
by Lutz
I have now clue whats going on here and cannot reproduce on my PCs with Win2k and XP-Home edition, so I am rolling back change by change from 7.5.14 to 8000rc1.
Please try:
http://newlisp.org/download/development ... tk-111.exe
to see if there is any difference
Lutz
Posted: Sun Mar 28, 2004 8:37 pm
by HPW
RC2 is working fine again for me.
No more crashes on startup and (+ 1 2 3) working again.
Also demo.lsp.
I must have been something with RC1's newlisp.exe, since I wrapped the new tcl and tried it with an older EXE. It had work fine. Also a file-diff only shows the changes on the manual-call.
So were the rolled back changes in newLISP.EXE?
newlisp_8000rc2_win-tk-111.exe
Posted: Sun Mar 28, 2004 8:44 pm
by gerhard zintl
Hallo Lutz,
rc2 is working fine. Thank you very much indeed.
Gerhard Zintl
Posted: Sun Mar 28, 2004 8:54 pm
by Lutz
thanks for the info Hans-Peter and Gerhard, in rc3 I try to put the change back but the 'right' way, please try rc3:
http://newlisp.org/download/development ... tk-111.exe
Lutz
Posted: Sun Mar 28, 2004 11:55 pm
by nigelbrown
rc3 works on my XP-Pro laptop
Posted: Mon Mar 29, 2004 5:27 am
by HPW
RC3 is working fine on my german WIN2K and WIN_XP office systems.
Posted: Tue Mar 30, 2004 10:54 am
by jp
I did check newlisp_8000rc1_win-tk.exe as well as newlisp-tk.exe v.111 on the following
Win98, Win2k, WinXP Pro on the US Edition, they work fine.
newlisp v8.0.0 did run well, even under the Win98 Japanese Edition.
But newlisp-tk.exe v.107 and the v.111 gave the same following error on the
Japanese Edition of Win98
-------------
Error sourcing /freewrap/newlisp-tk.tcl: bad menu entry index "*Fixedsys*"
-------------
========================================================================================
Only newlisp-tk v.095 with newLISP v7.1.4 works perfectly well on Win98 Japanese Edition
========================================================================================
And running newlisp-tk v.095 with the newlisp v8.0.0 or v7.5.0 give the same following error
------------------------------------------------
newLISP v8.0.0 Copyright (c) 2004 Lutz Mueller. All rights reserved.
>
symbol is protected in function define : (exit)
invalid function in function silent : (SYS:check-tempdir "C:/temp")
Jean-Pierre
Posted: Tue Mar 30, 2004 12:34 pm
by Lutz
go in to the file 'newlisp-tk.conf' and change the font spec:
set Ide(fontName) "Fixedsys")
to
set Ide(fontName) "Lucida Console"
regarding the other error: always use the newlisp-tk.exe together with newlisp.exe it was shipped with. Never mix files from different distributions because sometimes changes occur in the software affecting how both programs work together.
Lutz
Posted: Tue Mar 30, 2004 3:28 pm
by jp
Thanks Lutz
Now, newlisp_8000rc3_win-tk-111.exe with the change to the font mentioned above runs perfectly under Win98 Japanese.
Jean-Pierre